CF Flange Series

Provide customers with various stainless
steel products

CF-Copper Gasket
CF-Copper Gasket
CF-Copper Gasket
CF-Copper Gasket

CF-Copper Gasket

  • Categories:CF Flange Series
  • MOQ:1
  • Brand:QiiMii
  • FOB Port:Ningbo
  • Terms of Payment:Western Union, T/T, Paypal
  • Delivery Time:Contact with us for details

CF flanges are available with tapped or untapped holes. Tapped flanges are available in UNC/UNF or metric threads. Tapped flanges have

through holes, so bolts may protrude slightly from the back of the flange when fastened to an untapped flange. Untapped CF flanges

can be fastened to each other with stainless steel bolts and hex nuts or plate nuts. Plate nuts center themselves over two adjacent holes

and can be held in place with one finger while the bolts are tightened. They are available for most flange sizes from 1 1/3 to 10 inch (33.96-

254mm) ODs. As an alternative to hex head bolts, 12-point bolts are available for CF flanges from 2 3/4 to 10 inch (33.96 to 354mm) ODs.

Silver plated bolts eliminate the need for anti-seize compound in clean room environments.

Assembly Instructions for CF Flanges

1. Apply a small amount of high temperature anti-seize compound to the bolt threads.

2. Check that both flange surfaces are clean and sealing edges are free from nicks and scratches.

3. Using clean, lint free gloves, unpack gasket.

4. Place gasket in the knife edege counterbore of nonrotatable flange.

5. Align the mating hole pattern and leak test grooves.

6. Install the proper bolts and tighten had tight. Check to see that the flange faces are parallel.

7. Tighten the bolts 1/4 to 1/2 turns using a star pattern until the flange faces are metal to metal.

8. Torque the fasteners to the listed value using the same pattern.

Torque Specifications

> Online Message
Hot Products